Dkx-b series of spiral swing cylinder

The standard products of dkx-d series of spiral swing oil cylinder can bear bending moment, and can be installed by straddle or cantilever. Dkx-b series swing cylinder is widely used in swing of straight arm / curved arm and other aerial work platform.

Important product specifications           

Standard working pressure: 21MPa           

Standard swing angle: 180 degrees           

Driving torque: 508n. M ~ 5870n. M           

Holding torque: 1300n. M ~ 8040n. M           

Straddle bending moment: 2500n. M ~ 18000n. M           

Cantilever bending moment: 1356n. M ~ 6500n. M           

Axial load: 500kg ~ 4000kg           

Radial load: 1380kg ~ 4000kg           

Torque output mode: flange           

Installation method: foot or horseshoe           

Special models (torque, installation form, size, etc.) can be produced according to customers' requirements

Characteristics and advantages           

01 compact structure           

A larger screw angle is used in the cylinder to shorten the piston stroke.           

02 high bearing capacity           

The special internal structure of the oil cylinder enables the oil cylinder to bear large axial and radial loads.           

03 zero leakage           

The unique seal design makes the oil cylinder only have a very small amount of leakage approaching zero.           

04 load direct connection           

The load to be driven can be directly connected to the torque output.           

05 custom module           

According to the different needs of customers, customized production.