XCMG Official XR360 Rotary Drilling Rig for sale

XR360 Rotary Drilling Rig

1、It adopts dedicated hydraulic retractable crawler chassis and large diameter slewing bearing and has high stability.
2、The design of the machine complies with CE standard to ensure it’safty and Euro III emission standard.
3、The rotary drive can switch between Normal mode and Rock mode which are applicable for soil and rock excavation respectively，improve the efficiency.
4、It adopts the front-located single-rope main winch structure to greatly prolong the service life of steel wire rope and lower the use cost.
5、Several forms of Drilling rods are available for construction of big holes and deep piles in hard formation，the max. depth is 102 meters .
6、It is equipped with a centralized lubrication system as standard configuration; maintenance is easy.

Description	Unit		Parameter value
Max. drilling diameter	mm		2500
Max. drilling depth	m		102
Allowable luffing scope (from center of drill rod to slewing center)	mm		4410～4950
Drilling rig dimension in working condition (L × W × H)	mm		11000×4800×24586
Drilling rig dimension in transport condition (L × W × H)	mm		17380×3500×3810
Weight of overall unit (standard configuration, excluding drilling tool)	t		92
Engine	Model		CUMMINS  QSM11-C400
	Rated power/speed	kW	298/（2100r/min）
Max. working pressure of hydraulic system	MPa		35
Rotary drive	Max. torque	kN •m	360
	Rotational speed	r/min	5～20
Crowd  cylinder	Max. Pushing force	kN	240
	Max. Pulling force	kN	320
	Max.stroke	mm	6000
Main winch	Max.pulling force	kN	320
	Max. single-rope speed	m/min	72
	Diameter of the steel wire rope	mm	36
Auxiliary winch	Max.pulling force	kN	100
	Max. single-rope speed	m/min	65
	Diameter of the steel wire rope	mm	20
Drilling mast	Left/right inclination of mast	°	4/4
	Front/back inclination of mast	°	5/15
Rotary table slewing angle	°		360
Traveling	Max. traveling speed of the overall unit	km/h	1.5
	Max. climbable gradient of the overall unit	%	35
Crawler	Width of crawler plate	mm	800
	External width of crawler (min.-max.)	mm	3500～4800
	Center distance between two longitudinal wheels of crawler	mm	5175
	Average ground pressure	kPa	103.1