XCMG new 4 ton light vibratory roller XMR403S
double drum asphalt compactor machinery.
XMR403S is a light vibratory roller with
operating weight of 4.1 tons. This machine is suitable for surface and edge
compaction construction for asphalt engineering, cement engineering and so on,
also suitable for sub-base and base, sand and gravel material compaction work,
is the idealist compaction machinery for all sorts of parking lot construction,
road, sidewalks and bikeway compaction, as well as a variety of road
maintenance engineering.
Advantages:
* Closed hydraulic drive system is adopted to
realize stepless speed change.
* Brake system uses the neutral position
braking, emergency braking and parking brake, short braking distance and high
braking torque, ensuring the safety of the product.
* The front vision of machine is less than 1
x 0.75 m, rear view without any shade, which provides drivers with a good sight
range.
* The vibration system can realize the
simultaneous vibration and independent vibration of the rear and front drum,
and meets the different working conditions.
* High frequency vibration and excitation
force design, high working efficiency, good compaction effect.
* Vibration drum
width is larger than frame width, convenient to observe compaction condition
of drum edge in the construction.
Parameter |
Unit |
XMR403S |
Working weight |
kg |
4100 |
Static line load (front/rear) |
N/cm |
157/157 |
Vibration frequency |
Hz |
60 |
amplitude |
mm |
0.41 |
Exciting force |
kN |
42 |
Vibration wheel (diameter x width) |
mm |
800×1300 |
Theoretical climbing ability |
% |
30 |
Speed of work |
km/h |
0~10.6 |
Wheelbase |
mm |
1920 |
Steering angle |
° |
±30 |
Swing angle |
° |
±10 |
Minimum turning radius (inner) / (outside) |
mm |
3062/4362 |
Minimum ground clearance |
mm |
348 |
engine model |
404D-22T |
|
rated power |
kW |
40 |
Rated speed |
r/min |
2600 |
uMore road roller