XCMG Official Multi-function Rotary Drilling Rig XR240E (Euro Stage IV) for sale

As a multi-function machine, it can realize the quick switching of functions such as cylinder pressurization, crowd winch pressurization, oscillator, CFA, and dual power head. Meet more different construction needs.

The capacity of rotary drive and main winch is increased by 20% and the work efficiency is higher

The rotary drive can be equipped with a torque multiplier (optional).The casing drive torque is up to 360kN-m and the casing construction ability is stronger.

The main and auxiliary winches both adopt single-layer rope technology. The service life of the wire rope is 2〜4 times longer than that of the multi-layer rope and the cost is lower.

The double jib parallelogram luffing mechanism has a large support angle and a 16% increase in the support range. The operation a more stable.

The hydraulic system adopts negative flow control technology which has a fast response and good control performance.

The independent high-power rate temperature-controlled hydraulic oil cooler is suitable for high-temperature construction and can adjust fan speed with temperature changes.

Intelligent control system can automatically adjust and display the verticality of mast, automatically slew and slag discharge, CFA model automatically lifting concrete pouring and pile type display. The system uses bus panel design to prevent misoperation.

Item		Unit	Parameters
Working capacity	Max diameter	mm	Φ22OOmm(Crowd Cylinder)
			Φ2OOOmm(Crowd Winch)
	Max depth	m	70
Engine	Model	-	Volvo TAD1171VE
	Rated power	kw	265
	Tank volume	L	580
Rotary drive	Max torque	kN.m	240
	Speed	r/min	7-30
Working condition	Overall working height	m	22.7
	Overall working weight	t	82
Crawler	Crawler width	mm	3250-4400
	Shoes width	mm	800
	Shoes length	mm	5715
	Driving force	kN.m	485
	Travel speed	km/h	0-1.8
Mast	Lateral	°	4
	Forward	°	5
Crowd cylinder	Max crowded force	kN	210
	Max extraction force	kN	220
	Stroke	mm	5000
	Slow speed	m/min	5.8
	High speed	m/min	12
Crowd winch (optional)	Max crowded/ extraction force	kN	250/250
	Stroke	m	13
	Slow speed	m/min	7
	High speed	m/min	30
	Diameter of ropes	mm	24
Main winch	Max extraction force	kN	240
	Speed	m/min	0-70
	Diameter of ropes	mm	32
Auxiliary winch	Max extractio 门 force	kN	80
	Speed	m/min	0-70
	Diameter of ropes	mm	20
Hydraul c system	Max flow	L	2x280+90
	Max working pressure	Mpa	34