XCMG 70 ton Second Hand XE700D Large Hydraulic Crawler Excavator
1. It carries an original engine imported from America that meets TIER 3 emission standard. It is featured in strong power, low noise, low oil consumption and low emission and can satisfy the requirements of diversified operation modes. The engine is integrated with a high pressure fuel injection system, by controlling fuel supply actuator and timing actuator, ECM can achieve pure electric control of the full fuel injection process, precisely control injection amount and time of injection, reduce fuel consumption and increase engine efficiency.
2. Imported original hydraulic components and technologically advanced negative flow control system have not only extended service life of the entire vehicle but also improved its working efficiency; the new type main valve has a series of regenerative, convergent and prioritized functions that reduce energy consumption requirements; hydraulic oil cooling system has an independent cooling system, which can automatically control fan rotating speed according to oil temperature, reduce energy consumption and lower noises; what’s more, the fan can reversely rotate, and is convenient for the dust to be wiped off from the cooler.
3. It has a three-level fuel filtration system (one level of coarse filtration and two levels of fine filtration) that can effectively screen impurities out of fuel and guarantee long term, high load and continuous reliable engine operation under harsh working conditions. It has adopted a visible oil-water separator of the latest technology, with which, when to replace filter element can be determined from fuel level. During the full service life of filter element, oil intake resistance remains unchanged, which lowers the cost of filter element and reduces maintenance cost for customers.
4. The combination of oil bath type air filter + radial sealing type air filter system not only reduces maintenance cost, but also increases filtration rate to 99.99%, adaptable to dusty and damp working conditions.
5. The electric control system, which has a good performance and a reliable quality, realizes the perfect matching of power and hydraulic system, makes the best of engine power and guarantees quick and high efficient working operation.
Description | Unit | Parameter value | |
Operating weight | kg | 69000 | |
Bucket capacity | m³ | 2.4-4.6 | |
Engine | Model | Engine | QSX15 |
Direct injection | --- | √ | |
Four strokes | --- | √ | |
Water cooling | --- | √ | |
Turbo-charging | --- | √ | |
Air to air intercooler | --- | √ | |
No. of cylinders | --- | 6 | |
Output power | kW/ r/min | 336/1800 | |
torque/speed | N.m | 2102/1400 | |
Displacement | L | 15 | |
Main performance | Travel speed(H/L) | km/h | 4.2/3.0 |
Gradeability | % | 35 | |
Rotary speed | r/min | 7 | |
Ground pressure | kPa | 101.4 | |
Bucket digging force | kN | 363 | |
Arm digging force | kN | 300 | |
Travel traction force | kN | 450 | |
Hydraulic system | Main pump | -- | 2 |
Rated flow of main pump | L/min | 2×450 | |
Pressure of prime valve | MPa | 31.4/34.3 | |
Pressure of travel system | MPa | 34.3 | |
Pressure of swing system | MPa | 28.5 | |
Pressure of pilot system | MPa | 3.9 | |
Oil Capacity | Fuel tank capacity | L | 950 |
Hydraulic tank capacity | L | 500 | |
Engine oil capacity | L | 48 | |
Appearance size | Overall length | mm | 12130 |
Overall width | mm | 4410 | |
Overall height | mm | 4700 | |
Width of platform | mm | 4410 | |
Length of crawler | mm | 5955 | |
Overall width of chassis | mm | 4000 | |
Width of crawler | mm | 650 | |
Wheel base of crawler | mm | 4685 | |
Crawler gauge | mm | 2800/3350 | |
Clearance under counterweight | mm | 1565 | |
Min. ground clearance | mm | 853 | |
Min. tail swing radius | mm | 4090 | |
Working scope | Max. digging height | mm | 11300 |
Max. dumping height | mm | 7320 | |
Max. digging depth | mm | 6950 | |
Max. digging depth at the range of level 8 feet | mm | 6800 | |
Max. vertical wall digging depth | mm | 5550 | |
Max. digging reach | mm | 11580 | |
Min. swing radius | mm | 4750 |