Will Electric and Driverless Versions of Construction Machines Soon be Available?

Currently, electric and driverless construction machines are still niche products or only at the prototype stage. However, market requirements and manufacturers’ commitment are driving development.

 

The international construction machinery industry is under increasing pressure to prevent both exhaust emissions and noise emissions. Construction work elsewhere, for example in our inner cities, in hospital areas and in enclosed spaces, will also have to be as quiet and involve as few air pollutants as possible. The increased use of electric drives could be one way of achieving this.

 

Electric versions of smaller construction machines in particular already exist

“Mechanical engineering companies have already launched e-solutions for smaller machines, such as vibratory plate compactors, small rollers and compact wheel loaders”, says Dr. Darius Soßdorf, Technical Regulations and Standardization Consultant at the Construction - Equipment and Plant Engineering trade association. Top manufacturers such as XCMG, Volvo and CAT have been very active on the electrification scene for a few years now. Machinery factories set the goal to build up a full electric product portfolio, which already includes all essential e-devices and e-machines for developing inner-city construction sites, from battery-powered rammers through to wheel loaders.

 

Hybrid solutions for higher power ranges?

In contrast, manufacturers are currently still struggling with electric solutions for high-power-range machinery as the power required for the type of work in question is too high. “In order to supply a ‘normal excavator’ weighing approx. 15 tons with sufficient energy for a day shift, using current technology the necessary battery pack would weigh tons”. In light of this, hybrid vehicles are seen as another future area for development. “The device would be electrically powered for light work, for example driving, and then a combustion engine would be engaged where maximum power is required.”

 

An opportunity for recuperation and storage systems

It is clear that when electric drive units are used, the machine’s available energy must be used extremely carefully. “As such, solutions focusing on energy recovery and storage will be increasingly in demand for electric and hybrid machines in particular,” says Prof. Dr. Eng. Frank Will with certainty. The current Endowed Chair of Construction Machines at the Technical University of Dresden continues: “Whenever a machine works largely intermittently, these systems can offer considerable potential to make savings.”

 

Driverless construction machines are already in use in the mining sector

Like electrification, driverless vehicles are also one of the hot topics for future mobility. In relation to the rest of the construction industry, a lot of headway has been made in the mining sector. For example, XCMG and Caterpillar already sell commercially autonomous and semi-autonomous operating systems for dump trucks, bucket-wheel excavators, bulldozers and low loaders in the mining sector. Upgrading the hardware and software of other manufacturers’ trucks has also been part of this line of business since last year.